Airgun Moderator 6″
The best just got better!
- Our sixth generation of TalonTunes sound moderator SOS.
- All anodized finish. No scratching or chipping.
- 360 degrees of venting.
- Custom made high efficiency internals.
- Double o rings on connector.
- Designed to replace your factory end cap use your set screws to tighten the shroud down
- Will work with or without sound lock system.
- Will reduce sound signature by 60-70%.
- Will work with .177, .20, .22, and .25 caliber.
- Revolutionary Design.
- Weight is 5.3 Ounces.
Airgun Moderator will drastically reduce the muzzle blast of your —-
- Talon with a 12″ barrel,
- Talon SS with 12″ or 18″ barrel,
- Condor with 12″ or 18″ barrel,
- Condor SS with 12″, 18″, or 24″ barrel,
- Escape SS with 12″ or 18″ barrel.
- Will work with all calibers.
This six inch shroud is a direct replacement for your AF end cap and will work with the sound lock system.
These sell out very quickly – order now!
mike hawkins –
top notch quality,best shroud available, all you hear is the valve ping and pellet impact with my talon ss, I’ll have to get the condor shroud when I finally a condor…Tony is the man!!!
Anthony –
Hi tony
I got the condor shroud last week and finally got to shoot at the farm
The shroud works perfectly and I was getting dime sized groups at 50 yards .
Thanks to your shroud I was able to take out over. 75 starlings some up to 75 yards with deadly accuracy and stealth.
I also got numerous sparrows and at least 20 pigeons around the barn roof .
They never heard it coming.
Unfortunately the woodchuck season has been cut short due to our past severe winter
Thanks for all your help
Jack
HC (verified owner) –
Beautifully made piece of hardware. Fits perfectly onto my Condor SS. Sound signature has been reduced to just the hammer and the pellet hitting the target. Only suggestion for improvement would be to etch the set screw location onto the shroud rather than marking it.
Anthony –
Tony, much mahalos for your moderator! What a BIG DIFFERENCE a stock .25 TALON P noise is compared to your moderatir!! im still pushing the plastic water filled bottles out at 110 yards! It is still accurate, AND MUCH QUIETTER NOW! love it! YOU DA MAN!! Mahalos again, John
Carl (verified owner) –
Great workmanship and incredibly effective. I swapped out my 24″ barrel and shroud on my Condor, added an 18″ barrel and Tony’s latest 6″ shroud … holy crap, freakin’ AWESOME! Love the shorter rifle and it’s super quite!!
Thomas Comai (verified owner) –
Hi Tony, I received my 6 inch shroud today. Your craftsmanship is impeccable, second to none. I installed it on my Condor SS and it works perfect. I now have a very quiet Condor SS. Thank you!
Mike –
Got the moderator today…..very easy install…..quiet as mouse fart…..well made…I am so glad to have found Talon Tunes website….Tony is the MAN……!!!!!!!!!
joe –
I don’t have one myself. I am debating whether or not I want the aadded length to my rifle.(TSS .25 with codor valve and all the mods including fully shrouded and vented 21″ barrel by Tony.) But, I know these work very well because I’ve shot another guys gun that had one…so quiet!
Thomas Gordon (verified owner) –
This EXCEEDED my expectations. My Talon SS, like all other SS’s, isn’t that quiet. I want to shoot at targets in my back yard (thanks to the COVID-19 quarantine). Now, I do have a privacy fence, but am surrounded by neighbors in my subdivision. Without the shroud, the gun is loud enough to have a black and white pull into my driveway. With the shroud, the sound is GREATLY REDUCED; much more than advertised. I have no qualms about shooting targets now. Thanks Tony!
demonsoulslayer (verified owner) –
Was having some issues with the baffles moving after installing this, sent an email and Tony went out of his way through emails and a phone call to me to make sure everything was good to go. Great product and even better customer service!