Huma Regulator Uragan



In Stock Now…

This product ships in 24 hrs.

Huma-Air Tuning Regulator For The Airgun Technology Uragan

For the Airgun Technology Uragan model we have a tuning pressure regulator available that replaces the original factory regulator.

Due to our ultra compact build we reduced the size of the regulator compared to the factory reg with almost 70%. The extra space created we have used for extra regulated air.

This extra volume can be used for extra power with the same reg pressure or you can reduce the regulator pressure and get the same pelletspeed as before.
It is an one-on-one replacement, just remove the old regulator and replace it with the Huma-Air regulator and plenum. The regulator is placed with the pressure scale facing the high pressure input side of the action (hose side)
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits of the Huma-Air tuning regulator for the Airgun Technology Uragan

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Due to our compact regulator build and different plenum size you will have more air available and you can use lower output pressure for the same power

This product ships in 24 hrs

When you order your Vulcan tuning regulator you will receive:

    • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;

    • We will include a “Huma-Air regulated” breech sticker;

    • Volume plenum for extra regulated air

Pressure settings of the Vulcan regulator

The Vulcan regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
This model comes in the pressure range of 70-155 bar output pressure to cover a wide range of power settings

Huma-Air Quality Control

Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.


Additional information

Weight .50 lbs
Dimensions .125 × .125 × .25 in


There are no reviews yet.

Be the first to review “Huma Regulator Uragan”

Your email address will not be published. Required fields are marked *

Anti-spam: complete the taskWordPress CAPTCHA

You may also like…